Heater B-7 Wedge Heads
$9.49 LOW FLAT
RATE SHIPPINGToll Free
(877)-551-4653
Compare product with:
Heater B-7 Wedge Heads
- The Heater B-7 Wedges feature a unique beveled sole combined with a tour proven shape and bounce design to provide accurate play from any lie. The hitting face is taller promoting confidence at address.
- The beveled sole improves improves turf interaction and versatility
- Finished in a Brushed Satin finish to reduce unwanted glaring.
- Proven shape and bounce design provide accurate play from any lie.
- Classic and clean style and solid feel.
- 8 Lofts (48º to 64º) in Right Hand and 4 Lofts (52º - 64º) in Left Hand to fit any golfer.
- Loft, Lie, Face Angle +/- 1°; Weight +/- 3 gm tolerance.
| Club | Loft | Lie | Weight | Bounce | Offset | |||||
|
|
||||||||||
| 48º | 48° | 63° | 300 g | 6º | 1.5 mm | |||||
| 50º | 50° | 63° | 300 g | 6° | 1.5 mm | |||||
| 52º | 52° | 63° | 300 g | 8° | 1.5 mm | |||||
| 54º | 54° | 63° | 300 g | 8° | 1.0 mm | |||||
| 56º | 56° | 63° | 300 g | 12° | 1.0 mm | |||||
| 58º | 58° | 63° | 300 g | 12° | 1.0 mm | |||||
| 60º | 60° | 63° | 300 g | 10° | 1.0 mm | |||||
| 64º | 64° | 64° | 305 g | 10° | 0.5 mm | |||||
| Material: | 341 Stainless Steel | Bore: | 0.370" |
| Finish: | Satin Finish | Ferrule: | Required |
Description
Heater B-7 Wedge Heads
- The Heater B-7 Wedges feature a unique beveled sole combined with a tour proven shape and bounce design to provide accurate play from any lie. The hitting face is taller promoting confidence at address.
- The beveled sole improves improves turf interaction and versatility
- Finished in a Brushed Satin finish to reduce unwanted glaring.
- Proven shape and bounce design provide accurate play from any lie.
- Classic and clean style and solid feel.
- 8 Lofts (48º to 64º) in Right Hand and 4 Lofts (52º - 64º) in Left Hand to fit any golfer.
- Loft, Lie, Face Angle +/- 1°; Weight +/- 3 gm tolerance.
Specification
| Club | Loft | Lie | Weight | Bounce | Offset | |||||
|
|
||||||||||
| 48º | 48° | 63° | 300 g | 6º | 1.5 mm | |||||
| 50º | 50° | 63° | 300 g | 6° | 1.5 mm | |||||
| 52º | 52° | 63° | 300 g | 8° | 1.5 mm | |||||
| 54º | 54° | 63° | 300 g | 8° | 1.0 mm | |||||
| 56º | 56° | 63° | 300 g | 12° | 1.0 mm | |||||
| 58º | 58° | 63° | 300 g | 12° | 1.0 mm | |||||
| 60º | 60° | 63° | 300 g | 10° | 1.0 mm | |||||
| 64º | 64° | 64° | 305 g | 10° | 0.5 mm | |||||
| Material: | 341 Stainless Steel | Bore: | 0.370" |
| Finish: | Satin Finish | Ferrule: | Required |
Product Q&A
Have a question? Need more information? Ask our community.
Q
1 out of 1 found this question helpful. Do you? YES NO
Asked by JOHN H DALLINGA on Feb 7, 2023
A
it is 431 stainless steel. 431 stainless steel allows for up to +/-2 deg bending. Bending is done at your discretion. there is no warranty for bent heads.
Answered by Monark Golf Admin on Feb 9, 2023
Q
It seems the B7 series seem to follow the Taylormade design. What OEM is this wedge patterned after?
Do you find this helpful? YES NO
Asked by ajl on May 6, 2023
A
Heater B7 wedges are not a clone, not similar to any TM.
Answered by Monark Golf Admin on May 23, 2023
See all 5 questions for this product
Was the above review useful to you? 
